Location: | Gilbert, AZ |
Home Type: | Single Family |
Yr Built: | 2007 |
Sq. Ft.: | 2694 |
Yr Sprinklers Installed: | 2007 |
Sprinkler Cost: | $4000* |
In 2007, Travis Mack decided to have his new Gilbert, Arizona, home built with residential fire sprinklers. Travis reasons, “I work in the fire sprinkler industry and feel that it is appropriate that I practice what I preach. I also work from home and want the protection for my business as well as the piece of mind it provides for me in knowing that my family would be safe in the event of a fire. We have a young child and pets that I want protected in times of fire should it ever happen.”
The fire sprinkler system riser, water pressure gauge and inspector’s test valve. |
The house is a 2694 square foot, one story single family dwelling. Although Travis intended the house to be built with sprinklers from the beginning, the builder would not allow the sprinkler installation to take place during the home’s construction. Travis notes, “I live in a single story home with a large attic, so I knew that it could be retrofitted relatively easy. However, if this was a 2 story, I would have taken this fight to the local building official to let me have fire sprinklers if needed.” Travis chose to retrofit the home with a fire sprinkler system immediately after taking possession of the home from the builder.
As a professional fire sprinkler system designer, Travis designed the system himself. One of his business clients, Wicked Fire Protection of Flagstaff, AZ, agreed to perform the installation at cost. *This resulted in the entire home fire sprinkler retrofit only costing $4000 or $1.48 a sq. ft.
The home insurer is Ameriprise, and at this time, Travis does not receive a discount for having fire sprinklers. He indicates, “We have not had any monetary benefits as far as insurance premium reduction because we are max’d out already. We have deductions for a new home, smoke detectors, central alarm and a few others. The fire sprinkler discount will kick in at year 5. The benefit is that we will be able to keep our current “lower” premium for years to come because as current deductions phase out, the fire sprinkler deduction will cover those.”
Maintenance has not been an issue for Travis. The system is only about 6 months old. He has not had any problems, and currently, he is estimating that maintaining the system will cost less than $100 per year.
Travis feels that his residential fire sprinklers provide peace of mind that nothing else could give. In his words, “I have a greater piece of mind knowing that my home is safe when we are around or away. Our fire sprinkler system is tied to a central monitoring station so that even if a fire occurs and we are not home, the local fire department will respond and deal with the issue. Also, having small children at home, it is always nice to know that should a fire occur, we will be able to get out of the house safely.”
For more case study examples see the Case Studies Category
Is your home protected by a residential fire sprinkler system? If yes, we would like to know about it and feature you and your home in a case study. Download the “Installing Residential Fire Sprinklers Questionnaire”, answer the questions and return the completed questionnaire as indicated. We will use the information provided to publish a case study sharing your experience with residential fire sprinklers.
Kelly Reynolds
Kelly Reynolds April 11, 2009 at 7:01 pm
I can’t believe the builder would not install them. We had our house built in 2005 In Goodyear (AZ) and the builder only charged me an additional $3,000. (About $1.35sq. ft.)
I have State Farm Insurance and they give me a discount. Maybe you need to change homeowners insurance cos.
wendell inhoffer
wendell inhoffer July 9, 2009 at 2:25 pm
what are the approximate demands [gpm] for a single family dwelling, a townhouse and/or an apartment???
Dan Alderson
Dan Alderson August 15, 2009 at 3:09 am
I am a plumbing contractor in eastern NC. I am plumbing a house in a subdivision that requires sprinklers. This is the first time I have run into this. I want info on design & installation.Since they are not requied by code,I am not sure where to find design criteria.
Tony Fleming
Tony Fleming January 5, 2010 at 2:03 pm
Dan look me up if you still need some help!
steve heff
steve heff January 15, 2010 at 7:20 am
What kind of certifications are required in becoming a fire sprinkler system installer? I am a master plumber by trade and would like to offer this option to homeowners, but can’t find any info. Can I please get some help from anyone with this? Thanks
zach
zach January 26, 2010 at 1:52 pm
my girlfriend has a home daycare in order to get state approved to expand we need a sprinkler in the furnace room is it possible to just install just one head to an existing water line
CHRIS RANEY
CHRIS RANEY April 24, 2010 at 10:58 am
In-ground, one story home (I’m building myself), 2800 sqr. ft.. I will have, a lake (4 acre) based heat-pump with elec. backup. I have a wood furnace (5000 sqr. ft. capacity, 110VAC), in house, as backup (on LP generator and LP tank), or for occasional use.
Am putting in fire sprinkler system around wood furnace.
Questions (?)
(1)- Drywall, or cement board for the walls and ceiling?
(2)- What kind of paint on walls and ceiling?
(3)- 4 sprinklers, or more?
(4)- Metal or liquid based sprinklers?
(5)- Temp. rating of sprinklers?
S.E. MO.
THANKS!
Derek
Derek May 7, 2010 at 8:05 pm
Hey Chris im a union sprinkler fitter of 10 years..if it doesnt get too hot in there then you could go with 165 degree stander heads(red bulb)..if it gets kinda hot and what i would recomend is putting in 200 degree quick response heads(green Bulb)..metal or liquid based doesnt matter..as far as coverage your pushing it with 4 heads if you went by the book nfpa13 2 of your sprinklers would be illigel by rouchly 1 foot, either too far apart or too far off one wall. i am 98 percent sure it would put out any fire, but why take the chance with your house and family. And if your allready there doin the work its not much harder to add 2 more heads for a total of 6…what to keep in mind and dont be any closer than 6 foot between heads but for square footage and spacing i wouldnt be able to explain it without talking to you. so if you want you can emial me with your phone number at howie909 [at] gmail.com and i would be glad to assist you.. but if not try to keep the heads even spacing all directions.
Derek Local669
Terry
Terry July 2, 2010 at 3:05 pm
does anybody have info on schools for basic residential layout , hydraulic calcs.iam from california and as of jan 1 2011 fire sprinklers are required in all new residential construction. i have C-36 and just got my C-16 ,looking for a school to get ahead of the curve thanks
Gary L. Anderson
Gary L. Anderson September 22, 2011 at 9:07 am
looking at installing sprinkler system in 2,022 sq feet (10 year old home) with vaulted ceiling in two areas.
Possibly on the main floor only….
Looking for ideas and costs.
The home is located in Lawrence Kansas.
Neehal Patel
Neehal Patel June 10, 2013 at 8:13 pm
I need to to thank you for this great read!! I absolutely
loved every bit of it. I have you bookmarked to check out new stuff you post…